Specifications
DMCB-VH2132
| Travel | X - Axis Travel | 3200mm | |
|---|---|---|---|
| Y - Axis Travel | 2100mm | ||
| Z - Axis Travel | 1000mm | ||
| Distance between column | 2100mm | ||
| Working Space | 2100mm X 3200mm X1200mm | ||
| Spindle Nose To Table | 200-1200mm | ||
| Table | Table Size | 1800mmx3200mm | |
| T - Slot | 22mmx200mmx8T (22mmx120mm each side for one) |
||
| Maximum Table Load | 12000kg | ||
| Spindle | Spindle taper-D mm | BT50 | |
| Type Of Driving | Direct drive Vertical/Horizontal | ||
| Spindle speed | 2500rpm | ||
| Feed Rate | Rapid traverse(X.Y.Z)axis | X:20 Y:20 Z:15（m/min） | |
| Cutting feedrate | 7000(mm/min) | ||
| Type Of Driving | X Axis Type Of Driving | Belt decelerate(1:2) | |
| Y Axis Type Of Driving | Direct type drive | ||
| Z Axis Type Of Driving | Direct type drive | ||
| Automatic tool changer | Max.tool length | 350mm | |
| Max.tool weight | 15kg | ||
| Max.tool dia.-(Full tools) | Ø110mm | ||
| Max.tool dia.-(W/O Adjacent tool) | Ø200mm | ||
| Motors | 0iMF-β | ||
| Spindle Motor | 15/18.5kw(143Nm) | ||
| X Axis Servo Motor | 3KW(36Nm) | ||
| Y Axis Servo Motor | 3KW(36Nm) | ||
| Z Axis Servo Motor | 3KW BS(36Nm) | ||
| Cutting fluid Capacity(motor) | 300L(1000W) | ||
| Hydraulic tank Capacity(motor) | 160L(7500W) | ||
| Machine Accuracy | Positioning Accuracy (JIS) | ±0.005/300；±0.015/Full travel | |
| Repeat Poitioning Accuracy (JIS) | ±0.003mm | ||
| Others | Pneumatic supply | ≧ 6.5Kg/c㎡ | |
| Floor Space Measurement | 8400X5000X4800mm | ||
| Machine weight (approximate) | 32000KG | ||
Above specification are subject to change without prior notice.
Standard Accessories
| Vertical/Horizontal Mill Head 2,500rpm |
| Leveling Screws with Blocks |
| Tool Box |
| Air Blast through Spindle |
| Work Lamp |
| Unclamping Pedal |
| Three Color Light |
| Auto Power Off |
| Auto Lubrication System |
| Rigid Tapping |
| RS232 Interface |
| CF Card Interface |
| Portable Hand Wheel(MPG) |
| Spindle Coolant System |
| Heat Exchanger for Control Cabinet |
| Pneumatic System (not included pneumatic source and tube) |
| High Pressure Water & Air Gun |
| Chain Type Chip Conveyor |
| Screw Type Chip Conveyor |
| System Operation and Procedures Manual |
| Machine Operation Manual |
Optional Accessories
| BT-50 Arm Type ATC（24T/30T） |
| BT-50 Chain Type ATC（40T/60T） |
| Disk Type Oil-water Speartor |
| Auto Door |
| X, Y, Z Optical Scale |
| Tool Length Measurement System |
| Full Splash Guard |
| CE Standard |
| Oil Mist Collector |
| Atomizing Device for Spindle Oil Mist Cutting |
| Oil Hole Holder Function |
| Air Conditioner |