Vertical Machining Center VLB-16i
  • The VLB i Series offers optimum alignment of the motor and gearbox ensures no offset and guarantees steady smooth movement of the headstock along the Z-axis. This design significantly reduces torsion on the headstock and ensures optimum rigidity, long term accuracy, and repeatability. Large diameter pre-tensioned ballscrews have a double-nut preloaded design eliminating the potential thermal growth and promote high accuracy and high-speed positioning.
  • The X&Y roller linear guideways fully support the machine’s saddle and worktable, delivering outstanding X&Y-axis accuracy over the full travel range of the machine. This is critical during machining heavy workpieces. It can avoid deflection and is a key factor in maintaining part accuracy and precision. The Z sliding surface areas and gibs are coated with Turcite-B and hand-scraped for perfect fit and alignment.
Travel X - Axis Travel 1600mm
Y - Axis Travel 750mm
Z - Axis Travel 650mm
pindle Center To Z - Rail 830mm
Spindle Nose To Table 120 - 770mm
Table Table Size 1700 X 750mm
T - Slot (number*width*pitch) 5*18mm*150mm 
Maximum Table Load 1500kg
Spindle Spindle Taper BT-50
Spindle RPM 50-8000rpm
Type Of Driving Belt type(OP: Direct type)
Feed Rate X. Y Axis Rapid Feed Rate 24m/min
Z Axis Rapid Feed Rate 20m/min
X. Y. Z Max.Cutting Feed Rate 10m/min
Automatic tool changer Arm Type (Tool to Tool) 24T  (4.5sec)
Max. Tool Diameter*Length(adjacent) Φ220X350mm(Φ110X350mm)
Max. Tool Weight 15 kg
Spindle Motor 15/18.5kW 15/18.5kW
X. Y Axis Servo Motor 4.5kW 3.0kW
Z Axis Servo Motor 4.5kW BS 3.0kW BS
Machine Accuracy Positioning Accuracy (JIS) ± 0.005mm / 300mm
Repeat Poitioning Accuracy (JIS) ± 0.003mm
Others Approximate Weight 11000kg
Floor Space Measurement 5000*3510*3150mm

Above specification are subject to change without prior notice.
Standard Accessories
Fully-Enclosed Splash Guard
Electrical Cabinet with Heat Exchanger
Work Lamp
Alarm Lamp
High Pressured Coolant & Air Gun
Spindle Air Blast & Coolant Nozzle
Rigid Tapping
Auto Lubrication System
Editable CF Card Function
Portable Hand Wheel (MPG)
Auto interrupt & Power Off System
Leveling Blocks & Screws
Tool & Tool Box
Chip Flushing System
Spindle Coolant System
Screw Type Chip Conveyor + Cart
Operation Manual
Optional Accessories
BT50 6000~8000rpm
FANUC Manual Guide i
Air Conditioner for Electrical Cabinet
Tool Setter (Metrol TM-26D)
Tool Setter T24E-B-26S (Disc diameter:30mm)
Renishaw TS-27R (touch probe)
Renishaw NC4 (laser probe)
Renishaw OMP60 (optical workpiece probe)
Renishaw OMP60 (radio workpiece probe)
Oil skimmer (disc type)
CTS 30 bar (belt driven)
CTS 50 bar (belt driven)
CTS 30 bar (gear head driven)
CTS 50 bar (gear head driven)
Heidenhain Linear Scales for XYZ
Oil Mist Collector
Transformer 30kva
Chain Type Chip Conveyor + Cart
CE Standard
Coming Soon