Specifications
VLB-16i
| Travel | X - Axis Travel | 1600mm | |
|---|---|---|---|
| Y - Axis Travel | 750mm | ||
| Z - Axis Travel | 650mm | ||
| pindle Center To Z - Rail | 830mm | ||
| Spindle Nose To Table | 120 - 770mm | ||
| Table | Table Size | 1700 X 750mm | |
| T - Slot (number*width*pitch) | 5*18mm*150mm | ||
| Maximum Table Load | 1500kg | ||
| Spindle | Spindle Taper | BT-50 | |
| Spindle RPM | 50-8000rpm | ||
| Type Of Driving | Belt type(OP: Direct type) | ||
| Feed Rate | X. Y Axis Rapid Feed Rate | 24m/min | |
| Z Axis Rapid Feed Rate | 20m/min | ||
| X. Y. Z Max.Cutting Feed Rate | 10m/min | ||
| Automatic tool changer | Arm Type (Tool to Tool) | 24T (4.5sec) | |
| Max. Tool Diameter*Length(adjacent) | Φ220X350mm(Φ110X350mm) | ||
| Max. Tool Weight | 15 kg | ||
| Motor | MITSUBISHI | FANUC | |
| Spindle Motor | 15/18.5kW | 15/18.5kW | |
| X. Y Axis Servo Motor | 4.5kW | 3.0kW | |
| Z Axis Servo Motor | 4.5kW BS | 3.0kW BS | |
| Others | Approximate Weight | 11000kg | |
| Floor Space Measurement | 5000*3510*3150mm | ||
Above specification are subject to change without prior notice.
Standard Accessories
| Fully-Enclosed Splash Guard |
| Electrical Cabinet with Heat Exchanger |
| Work Lamp |
| Alarm Lamp |
| High Pressured Coolant & Air Gun |
| Spindle Air Blast & Coolant Nozzle |
| Rigid Tapping |
| Auto Lubrication System |
| Editable CF Card Function |
| Portable Hand Wheel (MPG) |
| Auto interrupt & Power Off System |
| Leveling Blocks & Screws |
| Tool & Tool Box |
| Chip Flushing System |
| Spindle Coolant System |
| Screw Type Chip Conveyor + Cart |
| Operation Manual |
Optional Accessories
| BT50 6000~8000rpm |
| FANUC + AICC II |
| FANUC Manual Guide i |
| Air Conditioner for Electrical Cabinet |
| Tool Setter (Metrol TM-26D) |
| Tool Setter T24E-B-26S (Disc diameter:30mm) |
| Renishaw TS-27R (touch probe) |
| Renishaw NC4 (laser probe) |
| Renishaw OMP60 (optical workpiece probe) |
| Renishaw OMP60 (radio workpiece probe) |
| Oil skimmer (disc type) |
| CTS 30 bar (belt driven) |
| CTS 50 bar (belt driven) |
| CTS 30 bar (gear head driven) |
| CTS 50 bar (gear head driven) |
| Heidenhain Linear Scales for XYZ |
| Oil Mist Collector |
| Transformer 30kva |
| Chain Type Chip Conveyor + Cart |
| CE Standard |