Specifications
DMC-1316
| Travel | X - Axis Travel | 1600mm | |
|---|---|---|---|
| Y - Axis Travel | 1300mm | ||
| Z - Axis Travel | 600mm | ||
| Distance between column | 1400mm | ||
| Working Space | 1300 X 1600 X 800mm | ||
| Spindle Nose To Table | 200-800mm | ||
| Table | Table Size | 1200x1700mm | |
| T - Slot | 18x150mmx7T | ||
| Maximum Table Load | 3000kg | ||
| Spindle | Spindle taper-D mm | BT40-150 / BT50-155 | |
| Type Of Driving | Direct Type / Belt Type | ||
| Spindle speed | 12000rpm / 8000rpm | ||
| Feed Rate | Rapid traverse(X.Y.Z)axis | X:15 Y:18 Z:18（m/min） | |
| Cutting feedrate | 7000(mm/min) | ||
| Type Of Driving | X Axis Type Of Driving | Direct type drive | |
| Y Axis Type Of Driving | Direct type drive | ||
| Z Axis Type Of Driving | Direct type drive | ||
| Automatic tool changer | Max.tool length | 300mm / 350mm | |
| Max.tool weight | 8kg / 15kg | ||
| Max.tool dia.-(Full tools) | Ø78mm / Ø110mm | ||
| Max.tool dia.-(W/O Adjacent tool) | Ø150mm / Ø200mm | ||
| Motors | 0iMF-β | 0iMF-β | |
| Spindle Motor | 11/18.5kW(52.5Nm) | 15/18.5kW(143Nm) | |
| X Axis Servo Motor | 3kW(27Nm) | 3kW(27Nm) | |
| Y Axis Servo Motor | 3kW(27Nm) | 3kW(27Nm) | |
| Z Axis Servo Motor | 3kW(27Nm)BS | 3kW(27Nm)BS | |
| Cutting fluid Capacity(motor) | 300L(1000W) | ||
| Others | Pneumatic supply | ≧ 6.5Kg/c㎡ | |
| Floor Space Measurement | 4450X4050X3650mm | ||
| Machine weight (approximate) | 15000KG | ||
Above specification are subject to change without prior notice.
Standard Accessories
| Fanuc 0i-MF controller 10.4" LCD |
| Leveling screws with blocks |
| Tool box |
| Air blast through spindle |
| Work lamp |
| Unclamping pedal |
| Three color light |
| Auto power off |
| Auto lubrication system |
| Rigid tapping |
| CF card interface |
| Portable Hand Wheel (MPG) |
| Spindle coolant system |
| Heat exchanger for control cabinet |
| Pneumatic system(not included pneumatic source and tube |
| High pressure water & air gun |
| Screw Type Chip Conveyor |
| Chain Type Chip Conveyor + Cart |
| System operation and procedures manual |
| Machine operation Manual |
Optional Accessories
| FANUC 0i-MF(1) Alpha controller 10.4" LCD |
| FANUC 0i-MF(1) beta controller 10.4" LCD |
| 90∘ angular milling head (Manual) / (Semi-automatic) |
| BT-40 Arm type ATC(24/30T) |
| BT-40 Chain type ATC(40/60T) |
| Column raised: 200mm /400mm |
| Tool length measurement system |
| Coolant through spindle (24Bar/50Bar) |
| Disk type oil-water speartor |
| Auto Door |
| X/Y/Z Optical scale |
| Workpiece measuement system |
| Full splash guard |
| CE standard |
| AICC2 (Preview blocks max.200) |
| Data Server memory capacity 1G |
| Oil-mist recovery equipment |
| Oil-mist coolant system |
| Oil Hole Holder Function |
| Air conditioner |