Specifications
DMCB-3260
| Travel | X - Axis Travel | 6000mm | |
|---|---|---|---|
| Y - Axis Travel | 3200mm | ||
| Z - Axis Travel | 1250mm | ||
| Distance between column | 3200mm | ||
| Working Space | 3200X6000X1600mm | ||
| Spindle Nose To Table | 350-1600mm | ||
| Table | Table Size | 2500x6000mm | |
| T - Slot | 28mmx200mmx11T (28mmx180mm each) | ||
| Maximum Table Load | 25000kg | ||
| Spindle | Spindle taper-D mm | BT50-200 | |
| Type Of Driving | Belt Type | ||
| Spindle speed | 6000rpm | ||
| Feed Rate | Rapid traverse(X.Y.Z)axis | X:10 Y:10 Z:10（m/min） | |
| Cutting feedrate | 6000(mm/min) | ||
| Type Of Driving | X Axis Type Of Driving | Planetary gear drive (7:1) | |
| Y Axis Type Of Driving | Planetary gear drive (4:1) | ||
| Z Axis Type Of Driving | Planetary gear drive (3:1) | ||
| Automatic tool changer | Max.tool length | 350mm | |
| Max.tool weight | 15kg | ||
| Max.tool dia.-(Full tools) | Ø110mm | ||
| Max.tool dia.-(W/O Adjacent tool) | Ø200mm | ||
| Motors | 0iMF-α | ||
| Spindle Motor | 18.5/22kW(307Nm) | ||
| X Axis Servo Motor | 9kW(53Nm) | ||
| Y Axis Servo Motor | 6kW(38Nm) | ||
| Z Axis Servo Motor | 6kW(38Nm)BS | ||
| Others | Coolant tank capacity (pump) | 300L (1000W) | |
| Hydraulic fluid tank capacity | 160L (7.5KW) | ||
| Pneumatic supply | ≧ 6.5Kg/c㎡ | ||
| Floor Space Measurement | 14400X6000X5300mm | ||
| Machine weight (approximate) | 82000KG | ||
Above specification are subject to change without prior notice.
Standard Accessories
| Fanuc 0i-MFa1 controller 10.4" LCD |
| Belt-type 6,000rpm |
| Leveling screws with blocks |
| Tool box |
| Air blast through spindle |
| Work lamp |
| Unclamping pedal |
| Three color light |
| Auto power off |
| Auto lubrication system |
| Rigid tapping |
| CF card interface |
| Portable Hand Wheel (MPG) |
| Spindle coolant system |
| Heat exchanger for control cabinet |
| Pressure system(not included air pressure source & air pressure tube) |
| High pressure water & air gun |
| Screw Type Chip Conveyor |
| Chain Type Chip Conveyor + Cart |
| System operation and procedures manual |
| Machine operation Manual |
Optional Accessories
| 90∘ angular milling head (Manual) |
| 90∘ angular milling head (Semi-automatic) |
| 90∘ angular milling head (Automatic) |
| BT-50 Arm type ATC(24T) |
| BT-50 Arm type ATC(30T) |
| BT-50 Chain type ATC(40T) |
| BT-50 Chain type ATC(60T) |
| Column raised: 200mm /400mm |
| Tool length measurement system |
| Coolant through spindle (24Bar/50Bar) |
| Disk type oil-water speartor |
| Auto Door |
| X/Y/Z Optical scale |
| Workpiece measurement system |
| Full splash guard |
| CE standard |
| AICC2 (Preview blocks max.200) |
| Data Server memory capacity 1G |
| Oil Must Collector |
| Atomizing device for spindle oil mist cutting |
| External interface for cutting oil mist to tool holder |
| Air conditioner |