Specifications
GT-3682
| Travel | X - Axis Travel | 8200mm | |
|---|---|---|---|
| Y - Axis Travel | 3600mm | ||
| Z - Axis Travel | 1500mm | ||
| Dolumn Distance | 4500mm | ||
| Working Space | 3600X8200X1900mm | ||
| Spindle Nose To Table | 400-1900mm | ||
| Table | Table Size | 8000x3500mm | |
| T - Slot | 32mmx250mmx18T | ||
| Maximum Table Load | 8000kg / M² | ||
| Spindle | Spindle Taper | HSK-63A | |
| Type Of Driving | Built-in Type | ||
| Spindle speed | 18000rpm | ||
| Feed Rate | Rapid traverse(X.Y.Z)axis | X:12 Y:12 Z:12（m/min） | |
| Cutting feedrate | 1~8000(mm/min) | ||
| Type Of Driving | X Axis Type Of Driving | Gear Ratio (1:20) | |
| Y Axis Type Of Driving | Gear Ratio (1:3) | ||
| Z Axis Type Of Driving | Direct Drive | ||
| Automatic tool changer | Max.tool Diameter | Ø78 (Full) ~ Ø150mm (Empty) | |
| Max.tool Length | 300mm | ||
| Max.tool Weight | 8kg | ||
| Motors | SIEMENS ONE | ||
| Spindle Motor | 30kW / 72Nm | ||
| X Axis Servo Motor | 5.5kW(36Nm) | ||
| Y Axis Servo Motor | 7.7kW(48Nm) | ||
| Z Axis Servo Motor | 7.7kW(48Nm)BS | ||
| Others | Coolant tank capacity (pump) | 300L (1000W) | |
| Hydraulic fluid tank capacity | 160L (7500W) | ||
| Pneumatic supply | ≧ 6.5Kg/c㎡ | ||
| Floor Space Measurement | 10320X6280X4900mm | ||
| Machine weight (approximate) | 60000KG | ||
Above specification are subject to change without prior notice.
Standard Accessories
| SIEMENS ONE controller 19" LCD |
| Built-in Type, 18,000rpm |
| Leveling screws with blocks |
| Tool box |
| Air blast through spindle |
| Work lamp |
| Semi-Enclosed Splash Guard |
| Unclamping pedal |
| Three color light |
| Auto power off |
| Auto lubrication system |
| USB interface |
| Portable Hand Wheel (MPG) |
| Spindle coolant system |
| Heat exchanger for control cabinet |
| Pressure system(not included air pressure source & air pressure tube) |
| High pressure water & air gun |
| Chain Type Chip Conveyor |
| System operation and procedures manual |
| Machine operation Manual |
| HSK63A Arm Type ATC(24T) |
| Coolant through spindle(30Bar) |
| X.Y.Z. A.C Optical scale |
Optional Accessories
| HSK-A63 ARM Type 30 position |
| HSK-A63 Chain Type 40 position |
| HSK-A63 Pocket Type 60 position |
| Heidenhain Optical Linear Scales XYZ |
| Renishaw NC4 |
| Renishaw OMP60 |
| CE Mark (Safety Door Switches) |