Specifications
HMC-500A / 500B
| Travel | X-Axis,Y-Axis,Z-Axis | X: 800, Y: 680, Z: 680mm | ||
|---|---|---|---|---|
| Spindle Nose To Pallet | 50-730mm | |||
| Spindle Center To Pallet Surface | 50-730mm | |||
| Table | Table Size | 500X500mm | ||
| Workbench Number | 1(OP:2) | |||
| Workbench Surface Configuration | M16-100mm | |||
| The Workbench Maximum Load | 500kg | |||
| The Smallest Unit of Setting | 1°(OP:0.001°) | |||
| Spindle | Spindle Taper | BT-50 | ||
| Type Of Driving | Belt Type | Direct Type | Belt+ZF | |
| Spindle RPM | 8000 rpm | 8000 rpm | 6000 rpm | |
| Controller and Motor | 0IMF-ß | 0IMF-α | 0IMF-ß | |
| Spindle Motor | 15/18.5 kW (143.3Nm) | 18.5/22 kW (118Nm) | 15/18.5 kW (143.3Nm) | |
| X Axis Servo Motor | 3kW(27Nm) | 7kW(30Nm) | 3kW(27Nm) | |
| Y Axis Servo Motor | 3kW(27Nm)BS | 7kW(30Nm)BS | 3kW(27Nm)BS | |
| Z Axis Servo Motor | 3kW(27Nm) | 7kW(30Nm) | 3kW(27Nm) | |
| B Axis Servo Motor | 2.5kW (20Nm) | 3kW (12Nm) | 2.5kW (20Nm) | |
| Feed Rate | 0IMF-ß | 0IMF-α | 0IMF-ß | |
| Z Axis Rapid Feed Rate | 24m/min | 24m/min | 24m/min | |
| Z Axis Rapid Feed Rate | 24m/min | 24m/min | 24m/min | |
| X. Y. Z Max.Cutting Feed Rate | 6m/min | 6m/min | 6m/min | |
| ATC | Arm Type (Tool to Tool) | 30T (4.5 sec) | ||
| Tool Shank | BT-50 | |||
| Max. Tool Diameter*Length(adjacent) | φ200*350mm(φ105*350mm) | |||
| Max. Tool Weight | 15kg | |||
| Others | Approximate Weight | A: 12000kg / B: 13000kg | ||
| Floor Space Measurement | A: 5000*4400*3200mm B: 5600*4400*3200mm |
|||
Above specification are subject to change without prior notice.
Standard Accessories
| Fully-Enclosed Splash Guard |
| Electrical Cabinet with Heat Exchanger |
| Work Lamp + Alarm Lamp |
| High Pressured Coolant & Air Gun |
| Spindle Air Blast & Coolant Nozzle |
| Rigid Tapping |
| Auto Lubrication System |
| Editable CF Card Function |
| Portable Hand Wheel (MPG) |
| Auto interrupt & Power Off System |
| Leveling Blocks & Screws |
| Tool & Tool Box |
| Chip Flushing System |
| Spindle Coolant System |
| Screw Type Chip Conveyor+Cart |
| Operation Manual |
Optional Accessories
| FANUC 0i-MF-(ALPHA PACKAGE)+AICC II |
| Air Conditioner for Electrical Cabinet |
| Chain type ATC-40T (40 taper) |
| Chain type ATC-60T (40 taper) |
| Chain type ATC-80T (40 taper) |
| CTS 30 bar / 50 bar |
| Heidenhain linear scales for XYZ |
| Renishaw TS-27R (touch probe) |
| Renishaw NC4 (laser probe) |
| Renishaw OMP60 (workpiece probe) |
| Transformer 30kva |
| Oil Skimmer |
| CE standard |