SPECIFICATION
VMC-1895
| Travel | X-Axis Travel | 1800mm(70.9") | |||
|---|---|---|---|---|---|
| Y-Axis Travel | 950mm(37.4") | ||||
| Z-Axis Travel | 750mm(29.5") | ||||
| Spindle Nose To Table | 150-900mm(5.9"-35.4") | ||||
| Spindle Center To Z - Rail | 1035mm(40.7") | ||||
| Table | Table Size | 2000 X 900mm(78.7"*35.4") | |||
| T-Slot | 6*22*150mm(6*0.86"*5.9") | ||||
| Maximum Table Load | 2500kg(5500lb) | ||||
| Spindle | Spindle Taper | BT-50 | |||
| Type Of Driving | Belt Type | ||||
| Spindle RPM | 50-6000 rpm | ||||
| Feed Rate | X. Y Axis Rapid Feed Rate | 18m/min | |||
| Z Axis Rapid Feed Rate | 15m/min | ||||
| X. Y. Z Max.Cutting Feed Rate | 6m/min | ||||
| Automatic tool changer | Arm Type (Tool to Tool) | 24T (4.5 sec) | |||
| Max. Tool Diameter*Length (adjacent) | φ220*350mm (φ110*350mm) | ||||
| Max. Tool Weight | 15kg | ||||
| Motors | Mitsubishi | Fanuc | |||
| Spindle Motor | 15/18.5kW | 15/18.5kW | |||
| X. Y Axis Servo Motor | 4.5kW | 3.0kW | |||
| Z Axis Servo Motor | 4.5kW | 3.0kW | |||
| Other | Approximate Weight | 17000kg(37400 lb) | |||
| Floor Space Measurement | 6300mm*4270mm*3360mm | ||||
Above specification are subject to change without prior notice.
Standard Accessories
| Fully-Enclosed Splash Guard |
| Electrical Cabinet with Heat Exchanger |
| Work Lamp |
| Alarm Lamp |
| High Pressured Coolant & Air Gun |
| Spindle Air Blast & Coolant Nozzle |
| Rigid Tapping |
| Auto Lubrication System |
| Editable CF Card Function |
| Portable Hand Wheel (MPG) |
| Auto interrupt & Power Off System |
| Leveling Blocks & Screws |
| Tool & Tool Box |
| Chip Flushing System |
| Spindle Coolant System |
| Y Axis Dual Augur Chip Extraction |
| Screw Type Chip Conveyor + Cart |
| Operation Manual |
Optional Accessories
| FANUC + AICC II |
| FANUC Manual Guide i |
| Air Conditioner for Electrical Cabinet |
| Tool Setter (Metrol TM-26D) |
| Tool Setter T24E-B-26S (Disc diameter:30mm) |
| Renishaw TS-27R (touch probe) |
| Renishaw NC4 (laser probe) |
| Renishaw OMP60 (optical workpiece probe) |
| Renishaw OMP60 (radio workpiece probe) |
| Oil skimmer (disc type) |
| CTS 30 bar |
| CTS 50 bar |
| Heidenhain Linear Scales for XYZ |
| Oil Mist Collector |
| Transformer 40kva |
| Chain Type Chip Conveyor + Cart |
| CE Standard |